Click image to view full size image
Isolation rubber bearings for building are building component products for seismic isolation and vibration absorption, which are developed in accordance with the current relevant national and industrial standards. Building isolation rubber bearings are divided into lead-core rubber bearings(LRB) and natural rubber bearings(LNR).
LNR
Linear rubber bearings(LNR) are made by laminating natural rubber sheets or chloroprene rubber sheets with steel plates. They possess good linear elastic properties and can significantly reduce the seismic effect on the structure and suppress the high-order responses of the structure.
The general approach is to design an isolation layer at the bottom of the building and install rubber isolation bearings in the isolation layer. Utilize the horizontal flexibility of the rubber isolation bearings to form a flexible isolation layer. Through the flexible isolation layer, seismic energy is absorbed and dissipated, and the transmission of seismic energy to the superstructure is blocked and reduced. Eventually, the purpose of reducing seismic damage to the superstructure is achieved.
This seismic isolation technology can not only ensure the overall safety of the structure but also prevent the damage of non-structural components, avoid the damage to the interior decoration and indoor equipment of the building as well as the secondary disasters caused thereby.
Comparison of seismic responses between isolated structures and non-isolated structures.
Characteristics of building isolation rubber bearings.
3, It has an appropriate damping ratio, which can effectively absorb seismic energy and reduce the seismic response of the superstructure.
4,It has a stable elastic reset function and can automatically and instantaneously reset during multiple earthquakes.
5,It has a simple structure and is convenient for installation, inspection and repair.
6, It has sufficient durability, and the normal service life of the product is 60 years.
7, There is abundant engineering application experience and it has successfully withstood the test of real earthquakes.
8, It has characteristics such as resistance to repeated loads, fatigue and aging.
9, It is applicable to adverse environmental conditions such as the marine environment.
After the pouring of the pier is completed and meets the curing standards, the hoisting of the bearing body will be carried out.
http://www.luzetech.com/